DIY: Converting Ergopower to Super Dummy Lever

Dummy lever start Start with brand new Veloce Powershift Ergo levers

Dummy lever step 1

Dummy lever step 8 Finish sanding, righthand unit is a dummy lever and left hand is the most comfortable brake only lever created by mankind

When it comes to the ergonomics of dropbar levers, Campagnolo absolutely nailed it with their third generation Ergopower. I want these for my fixed-gear handlebar, but unfortunately the levers have that annoying and useless shifter mechanism. So in order to convert a new set of Ergopower levers into something really useful, namely the most comfortable brake levers ever, here’s what you do.

1 Gut the shifters.

2 Cut the cross section of the shifter cavity into thin cardboard

3 Trace cross section onto 2×4”

4 Start carving

5 Keep carving. The righthand unit is purely a dummy lever, so the goal is to completely fair in the gap underneath the body and replace the brake blade, since without the shift mechanism there is no return spring to keep the blade from rattling without a brake connected. With lefthand unit, you’re trying to fair in the underneath and as close to the blade as possible while still allowing the blade to complete its travel all the way to the handlebar.

6 Now that the carving and sanding is done, ideally I’ll get these painted to protect the wood and to improve aesthetics. I’m still considering options for that.

After the jump, see photos of intermediate stages.

Dummy lever step 2

Dummy lever step 3

Dummy lever step 4

Dummy lever step 5

Dummy lever step 6

Dummy lever step 7

Dummy lever finish but no paint

We're riding townies, adventure, and mountain bikes. Find recommendations on our store page. As Amazon Associates we earn from qualifying purchases.