Team Bike Hugger on the Podium0
by Jason Swihart on May 30, 2007 at 5:38 PM
by Jason Swihart on May 30, 2007 at 5:38 PM
by Byron on May 30, 2007 at 11:58 AM
by andrew_f_martin on May 30, 2007 at 7:26 AM
A person operating a bicycle or human-powered vehicle approaching a steady red traffic control light shall stop before entering the inter-section, and shall yield to all other traffic. Once the person has yielded, he may proceed through the steady red light with caution. Provided however, that a person after slowing to a reasonable speed and yielding the right-of-way if required may cautiously make a right-hand turn.”
This is brilliant. There are plenty of bike folk who behave as though this is the law in Seattle (I noted a couple of blatant red-light-runners on my way in this morning). As much as I hate stopping and waiting, it’s the law where I live. In Idaho they have it figured out: Treat all red-lights as Yields. No complete stop necessary, no waiting. Sure, if there’s traffic you wait, but how much quicker would your commute be if you never had to wait at an empty red light. Time to write my congressman. At 180lb some seriously wasted momentum!
by Mark V on May 29, 2007 at 9:34 PM
The concept of the modal travel bike is to have a bike that is thoughtfully designed and equipped so that it could be run as a regular road bike or quickly converted into a single-speed road bike with minimal fuss and fit into an airline-friendly case for travel.
The S&S couplings allow the frame to separate into 2 pieces and fit into the travel case. The case just skims in under the airline surcharge. Once you put the frame in the case, you choose the “mode” of the bike and throw in the associated “modal” components.
The regular road mode would be ideal for cycling vacations when the itinerary is centered on cycling. Gonna ride the road to the sun in Hawaii? You’re gonna want all the gears.
But if you are going on a business trip to NYC or Berlin, you just want a bike that is quick and simple to build and pack. You might not have time to even leave city limits, assuming you knew where the best cycling route (which you probably don’t). Then you bring the bike in single-speed mode, and enjoy a quick break from tedious activites or enjoy freedom in new surroundings.
The core of the Modal Travel Bike is a frame with S&S couplings that is somewhat sporty in design. The modes are determined by which “modal” parts are added (chainrings, rear wheel, handlebar/lever, and chain). Packing the bike requires the same amount of disassembly as switching the modal parts, so you could use the bike as your everyday road bike while switching the bike to single-speed is the same operation as packing it: you are just tossing in a different set of parts for when you build the bike at you destination.
On the Bike Hugger Modal™ bike, I’m spec’ing vertical dropouts with a chain-tensioner for single-speed use, though my own bike by sycip has track dropouts that have a derailleur hanger. My dropouts make wheel changes awkward. However, my bike is not only fixed-gear compatible but also fully track legal if you removed the brakes. Byron will never run fixed, so I chose vertical dropouts for his bike. If we chose to develop this modal bike further, we will have to decide what type of dropout to use on a production basis.
I will be using a steel fork with lowrider mounts in place of the original carbon fork so that i can run front panniers and tour Japan. Thus, the fork is also a modal component.
My own bike has 4 handlebar sets:
2 hollowtech cranks (use same BB)
2 rear wheels:
2 sets of derailleurs:
With the use of Ritchey Cable Splitters and multiple front brakes, I don’t need to tune derailleurs or replace cables when I convert the bike from one mode to another. It takes me a maximum of 30-40 minutes to convert the bike from one mode to another or to pack the bike. As a fixed gear, I have regularly packed the bike in 25 minutes and assembled it in 15 minutes. Granted, I’m a bicycle mechanic, but a halfway competent person should take no more than twice as long to do the same.
If it takes so little time to assemble the bike fully geared, why would one want to take it as a single-speed/fixed? Because the single-speed parts are stronger and less vulnerable to damage in transit. You never need to worry about something going wrong with a single-speed when you only have one afternoon to ride in some out there location. It’s easier to pack since there are less components to carefully arrange in the travel case, and the bike is quicker to assemble. A single-speed is just less to worry about, and having a bike on a trip should relieve stress rather than add to it.
I’ve got my bike so thought out that I only need 5 tools (single-use, not multi-tools) to assemble the bike in any configuration.
What would really make my modal concept perfect would be a true 144mm bcd track crank made to fit an external bearing bb like the shimano’s hollowtech. As it stands, I cannot use real track rings because dura ace crank is 130mm bcd.
Hello, sram corporation? wanna sell me one of those truvativ “omnium” track cranks? I’ll be your best friend! I need a 165mm crank, thank you very much.
by Jason Swihart on May 29, 2007 at 1:30 PM
The Mt. Hood Cycling Classic 2007 starts tomorrow and Team Bike Hugger is already there getting ready, previewing the course, and strategizing. Follow their progress on our team blog, check the photos on Flickr, cheer them on, and wish them luck.
by Mark V on May 28, 2007 at 10:08 PM
So I’ve just got one week left to get everything together for my big trip to Japan. My travel bike is fully decked out for touring now….except for the gearing.
Jeremy Sycip came through with the new fork with lowrider mounts, as well as powdercoating the Tubus Duo rack and the fork to match the frame. Touring wasn’t on my mind when I designed this bike. The bike is basically a track bike with 130mm rear spacing and a derailleur hanger to make it a road race bike. The fork allows me to load up the front with panniers since the rear drop outs don’t have eyelets.
I have to say that I like the weight distribution with the bags on the front rather than the rear like my Davidson road bike. Part of it has to be the lower center of gravity for the front racks.
As pictured, the bike has Ortlieb Sport-packer Classic panniers on the fork mount, an Ortlieb Ultimate 5 handlebar bag and an Ortlieb Bike Box 3 on the custom Davidson titanium seat post rack. I don’t think Bill is eager to make more of these racks, but it works awesome.
I rode the bike on Bainbridge Island as a shake-down run, and I don’t think that the compact double crank with a 12-27 cassette is going to be low enough. Much as I hate triples, I’ll be re-kitting the bike with Tiagra triple cranks and derailleurs hooked to the current right DA sti and Suntour downtube shifter.
by Byron on May 28, 2007 at 6:47 AM
This came in from our contact form
Yesterday I met some wonderful individuals who really made my day. I was out for a bike ride with my girlfriend and I ended up popping a tire at the north end of Mercer Island. I was about to call my husband to pick me up when members of the Bike Hugger team kindly stopped and helped me out. Not only did they patch and pump my tire for me, they took the time to teach me how to do it in case it happens again in the future. It was so nice of them to stop their ride to help me out! THANK YOU!
It was our pleasure.
by Byron on May 27, 2007 at 5:54 PM
by Byron on May 27, 2007 at 5:34 PM
Pam recently tested the BlackBottoms Argento shorts. The Argento is a women-specific short with a reflective panel for maximum visibility. Pam wore the Argentos during her commute and thought the reflective design is a great concept, especially when working late and leaving after the sun has gone down.
She thought the 4-way stretch-pad was comfortable and the short-cut leg fit her thighs just right.
Her only criticism was the material used for the shorts. For lack of better words, it was slick and plasticky. I noticed the blend BlackBottoms sent us (86% nylon/14%s pandex) is different than the blend they’re selling now (79% nylon 21%spandex) and that may account for the shininess.
If you’re riding at night, on dim-lit streets, the Argentos are a good choice.
by Byron on May 27, 2007 at 6:49 AM
While the socks and jerseys are being made, we’ve got another order of shirts in and are well stocked. The Amazon inventory will update in a few days and they’re shipping now directly from us via PayPal.
Team Bike Hugger has got the shirts as well and selling them at races and their get togethers to raise money. Their next race is Mt Hood. Check the shirt action shot in this post.