On Your Left

I saw this license plate a light by my office. Very clever and one of the best vanity phrases I’ve seen on Washington State’s “Share the Road” plates.

A Change of Wardrobe

Living as I do on the suburban end of the New York City to “Upstate” training route, I have a particular birds-eye view on cycling patterns. (I could have told you that “aero” road bike frames were popular years ago, and I can accurately predict Triathlon season by the size of time-trialist biceps…) I’ve noticed one recently that’s taken me a bit by surprise.

For as long as I’ve been a road cyclist, loud (visually) jerseys and bright garish colors were the norm. Between the guys wearing full team kit for their favorite Euro squad and the guys wearing popular and eye-bending jerseys nearby Piermont Avenue often looked like a rolling circus. I even have a few jerseys in my personal collection that I keep just for their eye-bleeding awesomeness.

Recently though I’ve noticed a change—there are many fewer team kits on the road and there are even fewer “design” jerseys. On a two-hour ride today (a Saturday and as such the most heavily ridden day of the week here) I decided to do an informal survey. I kept track of the ratio of logo jerseys to design-free jerseys and was shocked to find that a good 75% of the riders were wearing a jersey with no sort of design.

I discounted any rider sporting a kit from an actual local team (since it wouldn’t be possible to know if they were racing on the team or just wearing a jersey) but I did count any rider with a local shop, even if it was the shop’s team jersey.

Most of the riders (especially those on the most expensive bikes) were wearing Castelli or other brands with no designs on them beside the small company logo. The cut of the cloth (blue against white, for example) was the only stylistic element. There was also one Rapha jersey.

Personally, I’m happy with this trend. Unlike, say, playing softball in a weekend league (or actually racing your bike in a race)—where a uniform is a good idea—there’s not a lot of need for athletic people to wear the printed logos of two dozen obscure European companies on their chest. It’s pretty rare, for instance, to go workout at the gym and see more than the occasional baseball or basketball jersey on a guy lifting weights. I don’t put on a Euskatel top to go for a hike in the woods. I’ve never wanted to kayak dressed in a Team Home Depot wetsuit.

I think the some of the stuff cyclists wear contributes to the “us versus them” mentality that is pervasive in suburban and many urban areas. Pros wear the gear they do because it’s designed to be so eyecatchingly-ugly as to guarantee recognition on the TV. Even some teams (LeOpArD Trek, Garmin-Cervelo and BMC come to mind) have begun to relegate the various sponsor logos to inferior positions on the jerseys and take advantage of the higher-resolution of HDTV to be less dependent on eye-blistering designs.

And since I don’t look as good in a BMC jersey as Cadel, I’d just as soon have something that leaves me visible to traffic but makes me look less like a rolling billboard.

Cyclocross: Amazing new products from Shimano (yawn)

I guess cyclocross has become big enough that both Shimano and Campagnolo decided to show up at the party at last. Well, for Shimano I can understand that they’ve gotten tired of losing OEM sales to FSA, SRAM, and the throngs of Asian OEM parts makers…after all, the offerings for complete cx bikes are more numerous than ever, and they go pretty upscale nowadays. There’s money buried in that mud. As for Campagnolo, who have all but given up entry- to mid-level OEM competitiveness…frankly I think their parts, particularly their 11-speed drivetrains and bottom bracket designs are so poorly suited to the filthy rigors of cx from the start. I don’t understand why they even bothered since their bits are inherently less versatile (e.g., dumb chainring standards), expensive for what they are, and hard to work on (e.g. anyone who says otherwise obviously hasn’t tried to service a Power-Torque crank).

Shimano is this huge juggernaut that must break free of immense inertia to get a product to market. The new CX70 cyclocross mini-group is slated to be available late fall this year….as an aftermarket offering. Because if they were going to be spec’ed on complete 2012 bikes, they would have needed to convince product managers last winter, during or before the Taipei Bike Show that units would be ready for deliver to assembly houses this summer….and clearly they didn’t/couldn’t. Part of this is because Shimano generally operates on a 3yr development cycle…but hell, Shimano first started floating rumors of CX-specific components to product managers a decade ago. Anyways, Shimano has a mini-group, here’s why you might care:

Crankset. Shimano is super obsessive on chainrings; the Dura Ace 7900 and 7950 big rings are perhaps the most sophisticated and best shifting rings ever created. During shifting the dramatic depth to the rings acts to make a shallower ramp up from the small ring, as well as aiding shifting by stiffening the ring as the front derailleur presses the chain against it. That’s the DA 7900/50 chainring (as well as the Ultegra 6700/6750)….these CX70 chainrings ain’t that sophisticated. The CX70 rings aren’t hollow and deep like the newer road rings…but they do have more shift pins and ramps to help shifting. All I can guess is that either Shimano making hollow rings for CX was too expensive for the price point , or they just decided that marketing a CX-specific was more advantageous. I have not had a chance to ride the CX70 crank, but I have no doubt that it shifts beautifully. However, one could argue that it’s all overkill since so many cross racers choose single ring setups.

And there are plenty of aftermarket CX rings that work quite well in Shimano drivetrains. Compared to the difficulties FSA and Campagnolo were having in making early 10sp compact road rings shift (a 16tooth jump from 34 to 50T), the 10 tooth jump from 36 to 46T just isn’t that hard to solve. Back then Shimano was slow to bring a compact road crank to market, but when they did they solved it by having the best chainrings on the market. Shimano had really set the standard and then upped it with the latest generation of DA and Ultegra, partially in anticipation of the needs of electronic Di2 front shifting. So after everyone else has already debuted CX-specific rings, it just seems like the CX70 rings are kinda halfway…lacking the first-level sophistication of the DA and Ultegra, they’re not really distinguishable from the industry pack.

Front dérailleurs. There are two significant features of the new CX70 front derailleurs. First, the cage curvature is optimized for smaller big rings (e.g., 46 tooth vs 50-53T of road rings) which should mean faster shifting and less chance of throwing the chain. Second, as unique amongst derailleurs that work with indexed front road shifters they are available in a top-pull cable configuration. Both top-pull and traditional, bottom-pull are available to fit clamp 31.8/28.6mm, clamp 34.9mm, and braze-on. The top-pull option is perhaps the most forward thinking aspect of the CX70 mini-group, as it will allow frame makers to run the derailleur cables on the top tube without the cable-reversing pulley. A pulley that invariably needs to be placed exactly were all the mud wants to cake, behind on the seat tube right above the BB shell.

New cantilever brakes. Well, the CX70 cantis are certainly unusual looking, and it seems reasonable to assume that the brakepad-on-a-stalk idea might discourage mud build-up. However, they don’t look like they offer versatility in set-up like the Avid Ultimate Shorty, nor the skeletal lightness of the reinvented Mafac legions (Spooky, TRP, etc). And as far are quality goes, I guess it was too much for me to expect sublime quality equal to the XTR V-brake. To my eye, these brakes will be more of an OEM thing, since Shimano cantis have traditionally been designed for ease of installation; in that light, the CX70’s lack of set-up versatility was doubtlessly a deliberate decision. Still, the product leaves me underwhelmed…after all, Shimano had plenty of time to come up with a badass brake.

So finally Shimano officially recognizes the value of cyclocross, and though consumers can be assured of dependable quality, the company have done little so far to raise the bar for CX components. However, if Shimano brings out a system of brake/shift lever integrated with hydraulic disc brakes, they can/will put everyone else on the back foot. But don’t look for that just yet…remember: 3-yr development cycle.

Specialized S-Works Epic: Big Wheel Fun

Up near the cows

Fear and adrenaline flashes your memory quick. I hadn’t been on a Mountain Bike for two decades, turned a sharp corner on some single track and suddenly yelled,

hey! …. get the F out the way!

A couple of journalists had stopped on the trail to take photos of the demo bikes they were on and my ride was instantly in extreme peril. I threw the bike right to avoid the journos, banked up on the single track, then left. BREATHE and then more body english to keep it upright. The rear shocked compressed, butt up, back, and bam I was on my way with a, “Hooaah!”

The rush from that awesome trick maneuver encouraged me to take another trip up the mountain and back down. 29rs are fun I decided. The most fun I’ve had in years on a bike. I also learned that the 45 minute climb to the cows was NOT the bunny trail, but the TripleX Black Diamond Death run, or whatever they call it. More fun!

22 lbs, XTR

I ride for many reasons and those aren’t necessarily fun. Racing, training hard, is never fun. It’s for the challenge, the high of going that fast or hard. I do it to clear my head and remember why I do what I do. When I travel, I’m riding and blogging. That’s work. I enjoy it all immensely - maybe too much like the Venge Ride – but there’s a reason we publish this blog and that’s cause we’re unabashed in our enthusiasm for the bike.

I’d heard for years about 29rs and there was lots of talk about them during the Specialized Global Product Launch. It was as if you had to convert or something to a faith evangelized with big statements like, “And you can go fast on the road too.” I thought, it’s a wheel size, right? What’s the big deal? The deal is that it’s something to talk about in Mountain Biking and they’re finally getting the geometries down from the ridiculous looking bikes a few years ago. Does it roll better? I guess. See above for the most important part: fun.

More than the 1/2 inch of travel on the last MTB I rode

2011 Tour Photos

Local Racer and Photographer Mike Hone was at the Tour this year and has been uploading his photos. This one of Cadel, captures the effort that went into the win in the TT. Check his TDF collection for more.

cadel

Photo uploaded to Flickr by Mike Hone, all rights reserved, and used by permission.

Page 1 of 11 pages  1 2 3 >  Last › | Archives





Advertise here

Latest Photos

About Bike Hugger